Boot Camp is a very useful service for macOS. Further, it helps Mac to install Windows 10 OS. In addition, it is a built-in function to help the Mac PCs. With this functionality, you can try to download the drivers for Boot Camp. So, the drivers are downloaded to a USB drive connected to your Mac device. Moreover, you may get a message like ‘The USB drive cannot be used. Please format the USB drive as a single MS-DOS (FAT) partition with Master Boot Record (MBR)scheme’. But many people don’t know ‘Format The USB Drive As Single MS-DOS (FAT) Partition With Master Boot Record Error In Boot Camp Assistant: How To Fix?’. Don’t worry at all. We are here to help you. Thus, let’s take a look at ‘Format The USB Drive As Single MS-DOS (FAT) Partition With Master Boot Record (MBR) Error In Boot Camp Assistant: How To Fix?’.
Table of Contents
Format The USB Drive As Single MS-DOS (FAT) Partition With Master Boot Record (MBR) Error In Boot Camp Assistant: How To Fix?
Boot Camp Drives are effective for downloading the Windows 10 Boot Camp Drivers. The message error suggests that the USB drive that you want to defend Boot Camp drivers must get formatted with MS-DOS (FAT) with Master Boot Record (MBR) scheme available. There is a solution available to fix this issue. We are delivering here a tutorial on ‘Format The USB Drive As Single MS-DOS (FAT) Partition With Master Boot Record (MBR) Error In Boot Camp Assistant: How To Fix?’. So, you need not worry at all. We assure you that this comprehensive data will help you in many ways. Thus, don’t miss this opportunity. We have also covered the article on ‘How To Fix: Sorry There Was A Problem Mounting The File‘. Let’s begin the tutorial now.
Process Used For This Purpose
There is a systematic process available for this purpose. So, simply go through the steps below to complete the operation.
1 ) Primary Arrangements Phase
Most importantly, you should be sure about the connections. So, do check it very carefully. Then, it is essential to have a backup of your data as there is a need of erasing it. Thus, go for it to execute properly.
2 ) Open the ‘Disk Utility
After that, you should go for opening the ‘Disk Utility. So, open it by searching it using the search function on the device.
3 ) Select the ‘Show all devices’ Option
Further, click on the ‘View’ button on the left-hand side of the window. Then, there will be some options displayed below that. This will represent the actual USB drive instead of showing the volume(s) on it. So, click on that option to move ahead.
2 ) Choose the ‘Erase’ Option
Choose the USB drive available under the ‘External’ segment available on the left side. Then, right-click on that & further, click on the ‘Erase’ option. Moreover, type a name for the USB drive in the box. Then, select the ‘MS-DOS (FAT)’ option in the ‘Format’ box. In addition, select the ‘Master Boot Record’ option for the ‘Scheme’ option available on the window. When you are done with everything, click on the ‘Erase’ option below that.
3 ) Launching the Boot Camp Assistant
In the end, when all the things are set, go for launching the Boot Camp Assistant. Here, you will not get any error message on the screen.
In this way, following the above-mentioned steps, you can easily get the desired outcomes.